High-performance V-belt with raw edges, designed for demanding industrial drives where conventional wrapped belts fail due to small pulley diameters or high operating temperatures. The AX profile combines the versatility of a classic dimension with modern raw edge construction technology.
AX Profile: Raw edge variant of the classic A profile with dimensions of approx. 13 x 8 mm. Thanks to the absence of wrapping and precisely ground edges, the belt achieves maximum friction in the groove, which eliminates slippage and increases the efficiency of the entire drive.
Cogged: The cogged geometry on the underside significantly increases the flexibility of the belt. This allows its safe installation on very small pulley diameters, where a standard wrapped 13/A belt would suffer from excessive internal stress and crack.
EP Construction (EPDM): The core is made of an advanced EPDM compound reinforced with polyester tension cords. This structure ensures extreme shock resistance, minimal stretch, and excellent stability in the groove even under high loads.
High Temperature Resistance: Thanks to EP technology and raw edges that dissipate heat better, this belt handles an extreme temperature range from -40 °C up to +110 °C. This makes it an ideal choice for poorly ventilated spaces or drives close to heat sources.
"Match and Forget" Tolerance: As with other premium SKF belts, a strict length tolerance is guaranteed for the AX EP series as well. Belts of the same nominal length can be freely combined into sets without the need for additional measurement or matching.
Durability and Efficiency: The belt is fully antistatic according to ISO 1813. The Raw Edge design ensures lower energy losses than wrapped belts, which translates into lower drive energy consumption and less bearing heating.
Interchangeability: For more demanding drives, we recommend using the higher-performance narrow-profile SPA series, or the raw edge XPA version. These belts can be fitted on the same pulleys as the original 13AX belts.
Installation: 13AX belts are installed on pulleys of the SPA profile.