High-performance V-belt with raw edges, designed for demanding industrial drives where classic wrapped belts fail due to small pulley diameters or high operating temperatures. The AX profile combines the versatility of a classic dimension with modern raw edge construction technology.
AX Profile: Raw edge variant of the classic A profile with dimensions of approx. 13 x 8 mm. Thanks to the absence of a cover and precisely ground sides, the belt achieves maximum friction in the groove, which eliminates slippage and increases the efficiency of the entire drive.
Cogged: The cogged geometry on the underside significantly increases the flexibility of the belt. This allows for safe installation on very small pulley diameters, where a standard 13/A wrapped belt would suffer from excessive internal tension and crack.
EP Construction (EPDM): The core is made of an advanced EPDM compound reinforced with polyester tension cords. This structure ensures extreme shock resistance, minimal stretch, and excellent stability in the groove even under high loads.
High Temperature Resistance: Thanks to EP technology and raw edges that dissipate heat better, this belt can handle an extreme temperature range from -40 °C to +110 °C. It is thus an ideal choice for poorly ventilated areas or drives close to heat sources.
"Match and Forget" Tolerance: As with other premium SKF belts, a strict length tolerance is guaranteed for the AX EP series as well. Belts of the same nominal length can be combined as desired into matching sets without the need for additional measuring or matching.
Durability and Efficiency: The belt is fully antistatic according to ISO 1813. The raw edge design ensures lower energy losses than wrapped belts, which translates into lower energy consumption of the drive and less bearing heating.
Interchangeability: For more demanding drives, we recommend using the more powerful narrow profile SPA series, or in raw edge design XPA. These belts can be fitted on the same pulleys as the original 13AX belts.
Installation: 13AX belts are installed on SPA profile pulleys.