A standard industrial belt designed for reliable power transmission in lighter drives where compact dimensions, high flexibility, and economical operation are required.
10/Z Section: Conventional section with dimensions of approx. 10 x 6 mm. This is the smallest standard dimension in the range of classic sections, optimized for transmitting smaller torques while maintaining high flexibility.
High Flexibility: Thanks to its slim cross-section, this belt is capable of operating on very small pulley diameters, allowing for the construction of very compact transmission systems.
Construction (Standard/Profi): The core consists of strong polyester tensile cords embedded in an elastic rubber compound. This construction ensures good resistance to material fatigue from frequent bending in the grooves of small pulleys.
Wrapped Design: The surface of the belt is protected by a textile cover, which increases mechanical resistance and ensures smooth entry into the grooves. The cover also allows for smooth drive startup with slight slippage, protecting the motor during sudden loads.
L=L (Set Free): High-quality manufacturers guarantee tight length tolerances even for the 10/Z section. This enables trouble-free assembly into multi-belt drives without the need for matching individual pieces based on production batches.
Resistance: The belt features antistatic properties in accordance with the ISO 1813 standard. It is resistant to mineral oils and routinely handles operating temperatures ranging from -30 °C to +80 °C.
Interchangeability: For more demanding drives, we recommend using the higher-performance narrow section series SPZ, or the raw-edge molded cogged version XPZ. These belts can be fitted on the same pulleys as the original 10Z belts.
Installation: 10Z belts are installed on SPZ section pulleys.